Description : ESP32-CAM Development Board ESP32 WIFI Bluetooth Serial Camera Module OV2640

Features:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.

Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Included:
1 x Development Board

Logic Level Converter module for serial I2C IIC SPI,3.3V to 5V,Arduino HQ

Logic Level Converter module for serial I2C IIC SPI,3.3V to 5V,Arduino HQ

DIY44

ADNS 3080 Optical Flow Sensor APM2.5 improve position hold accuracy Multicopter

ADNS 3080 Optical Flow Sensor APM2.5 improve position hold accuracy Multicopter

DIY49

Déclencheur à bobine haute tension

Déclencheur à bobine haute tension

DIY100

Résistance 1/4w 100Ω

Pas de Photo

DIY123

Caddx Polar Vista

Caddx Polar Vista

DIY206

Résistance 1w 100kΩ

Résistance 1w 100kΩ

DIY226

Résistance 100w 1Ω

Résistance 100w 1Ω

DIY225

ESP32-C6-DevKitC-1-N4 ESP32-C6

 ESP32-C6-DevKitC-1-N4 ESP32-C6

DIY224

CC2530 Module de communication sans fil 256KB 8KB RAM Nœud de capteur ZigBee

CC2530 Module de communication sans fil 256KB 8KB RAM Nœud de capteur ZigBee

DIY223

SmartRF04EB CC1110 CC2530 Zigbee Emulator Programmer

SmartRF04EB CC1110 CC2530 Zigbee Emulator Programmer

DIY222