Description : WS2811 5050 RGB LED Lamp Panel Module Round 16-Bit 60mm 5V Rainbow LED Stable

Model: 16 Round 5050 full-color LED module
Dimensions: Diameter 60mm
Chip: WS2811 (built-in LED)
LED: 5050 RGB full color highlight package
Voltage: 5V
Port: Digital
Platform: Arduino microcontroller
5050 highlight LED, built-in control chip, only an IO port to control multiple LED
Chip built shaping circuit, signal distortion is not cumulative, stable display
Adjust brightness tricolor 256, 160,000-color TFT display, scanning frequency of not less than 400Hz / S
Serial even level interface, via a signal line to complete the reception and decoding of data
Refresh rate of 30 frames / sec, even low-level mode even series of not less than 512 points
Send and receive data at speeds up to 800Kbps
Highlight LED, light color high brightness consistency
Both ends even level interface, can be connected directly

Diode 1N5822 3A 40V

Pas de Photo

DIY145

Raspberry Pi 3 Model B+

Raspberry Pi 3 Model B+

DIY192

Photorésistance LDR GL5537

Pas de Photo

DIY160

Diode 1N4004 1A 400V

Diode 1N4004 1A 400V

DIY142

Support vis à bille BF12

Support vis à bille BF12

DIY168

ESP32-C6-DevKitC-1-N4 ESP32-C6

 ESP32-C6-DevKitC-1-N4 ESP32-C6

DIY224

CC2530 Module de communication sans fil 256KB 8KB RAM Nœud de capteur ZigBee

CC2530 Module de communication sans fil 256KB 8KB RAM Nœud de capteur ZigBee

DIY223

SmartRF04EB CC1110 CC2530 Zigbee Emulator Programmer

SmartRF04EB CC1110 CC2530 Zigbee Emulator Programmer

DIY222

E18-TBL-01 USB TO TTL Serial port CH340G USB

E18-TBL-01 USB TO TTL Serial port CH340G USB

DIY221

UC3843 DIP-8

UC3843 DIP-8

DIY220